Photo By ChristianChan at Shutterstock
Did you know that replacing your plumbing fixtures with more water-efficient models could help to save you money? Fixtures such as low-flush toilets can help cut your water bill, save water, and reduce your environmental impact. They may also reduce the need for an emergency plumber.
If you live in Heath, TX or the surrounding area are looking for a plumber for fixture installation, or require an emergency plumber, you may like to contact bluefrog Plumbing + Drain. The company can install toilets, sinks, and other plumbing features. They also provide a selection of other services, including leak detection, drain cleaning, and can provide a plumber.
If you’re interested in finding out how to save water and money by investing in new plumbing fixtures, read on. This article will give you some tips to help you reduce your bills and reduce the chance that you’ll need an emergency plumber. Buying new kitchen and bathroom fixtures may seem expensive, but you will be able to recoup the money over time due to the savings you’ll make.
Water-saving Plumbing Fixtures
Water saving plumbing fixtures are known as low-flow fixtures or fittings. These offer homeowners the chance to make significant savings and to become more eco-friendly. If you’re planning to remodel your kitchen or bathroom, you may like to choose low flow fixtures. The following fixtures will help you to conserve water and become eco-friendlier and more sustainable. You will even receive a rebate for replacing old plumbing fixtures with modern, low-flow alternatives in some states of America.
Low-Flow Showerhead
One of the most popular chances homeowners make is to replace their showerhead with a low-flow option. Low flow showerheads have a significantly lower flow rate of between 2.0 and 2.5 gallons per minute, with a water pressure of around eighty pounds per square inch (psi). While these showerheads use less water, they still create a nice shower; you won’t be able to tell that the showerhead is low flow.
There are two main types of low-flow showerheads on the market. These are known as Laminar flow and Aerating low flow showerheads. Low-flow showerheads are usually used to replace older showerheads with a flow rate of 5.5 GPM and above.
Laminar-flow showerheads
The benefit of choosing a laminar-flow shower head is that you’ll be able to have more control over the water temperature. A laminar-flow showerhead forms streams of water, and the speed can often be adjusted as well as the temperature. They may also reduce the need for an emergency plumber.
Aerating low flow showerheads
A shower with an aerating low flow heads will combine flowing water with air to create a fine, mist-like spray. These showerheads aren’t the best if you live in a humid climate as they generate a lot of steam and moisture. It’s also harder to control the temperature than with a laminar-flow shower head.
Low flow toilets
Low-flow toilets, which are sometimes also known as low-flush or double-flush toilets, have been designed and manufactured to cut down on water consumption. Many low flow toilets use up to half the amount of water then a traditional toilet uses. On average low flow, toilets use 1.6 gallons per flush, whereas traditional toilets use 3.5 GPF.
Low flow toilets have increased in popularity since they were first introduced in the early 1990s. Older models of low-flow toilets were often ineffective and sometimes didn’t flush as well as traditional toilets. Modern techniques have been developed, which means that low flow toilets now offer greater functionality and performance.
Many low flow toilets have half flush and full flush options, which can be used for flushing liquid or solid waste. Low flow toilets generally have a wider drainage passage, which means they are less prone to blockages.
There are two types of low flow toilets, those that are fed by gravity and pressure-assisted low flow toilets. These toilets are very efficient and may reduce the need for an emergency plumber.
Gravity-fed low-flow toilets
Gravity-fed toilets are more like a traditional toilet as they use the water’s weight to move the waste through the system and out of the bowl. This type of toilet is generally cheaper and quieter than pressure-assisted low flow toilets.
Pressure-assisted low-flow toilets
These toilets are slightly noisier than the gravity fed toilet but use less water. A pressure assisted toilet can reduce water consumption by as much as 45% compared to toilets that use the gravity-fed method. These toilets use air pressure, which builds up inside the toilets tank. When the toilet is flushed, the air pressure pushes the water down.
Faucets
If your home has old faucets in the kitchen and bathroom, these could be using a lot of water and costing more money. You may like to consider replacing old faucets if they use more than 2.5 gallons of water per minute.
Outdated faucets can either be replaced with a new faucet that has a rating of less than 1.5GPM. Alternatively, you could install an aerator that will restrict the flow of water. Aerators can be added to most faucets. These allow you to easily and cheaply modify your faucets and will reduce your water bills over the years.
The Benefits of Low-flow Plumbing Fixtures
Basic low-flow toilets and other plumbing fixtures may be cheaper than you think. As well as the cost of buying the item, you’ll need to take into account the plumbing costs and time requirements of installing the new fixture.
Low flow fixtures are great for retrofitting and help to save water. A low-flow toilet is likely to save approximately 20,000 gallons of water annually if you live in a four person household. Low flow toilets are very water-efficient and will save you money on your water bills.
Low flow toilets and fixtures are available in many different styles and colors, so you’ll likely find something that fits in with your décor. These products are regulated by the International Association of Plumbing and Mechanical Officials (IAPMO) and approved by the American National Standards Institute (ANSI). In some states, grants are available for installing water saving fixtures in your home.
bluefrog Plumbing and Drain, Emergency Plumber
If you’re looking to install low-flow water features in your home, or require an emergency plumber, in Heath, TX, don’t hesitate to contact the team at bluefrog Plumbing + Drain of North East Dallas! The team can provide an emergency plumber 24/7.
Call an emergency plumber today on 972-483-2583.
Free Diagnostic - With Paid Repair
